SN74AHC125PW点击型号即可查看芯片规格书
SN74AHC125PW 中文资料规格参数
技术参数 | 电源电压(DC) | 2.00V ~ 5.50V |
输出接口数 | 4 | |
通道数 | 4 | |
针脚数 | 14 | |
位数 | 4 | |
传送延迟时间 | 8.50 ns | |
电压波节 | 5.00 V, 3.30 V | |
输出电流驱动 | -1.00 mA | |
输入数 | 4 | |
工作温度(Max) | 85 ℃ | |
工作温度(Min) | -40 ℃ | |
电源电压 | 2V ~ 5.5V | |
电源电压(Max) | 5.5 V | |
电源电压(Min) | 2 V | |
封装参数 | 安装方式 | Surface Mount |
引脚数 | 14 | |
封装 | TSSOP-14 | |
外形尺寸 | 长度 | 5.1 mm |
宽度 | 4.5 mm | |
高度 | 1.05 mm | |
封装 | TSSOP-14 | |
物理参数 | 工作温度 | -40℃ ~ 125℃ |
其他 | 产品生命周期 | Active |
包装方式 | Tube | |
制造应用 | 自动化与过程控制, 工业, 信号处理 | |
符合标准 | RoHS标准 | RoHS Compliant |
含铅标准 | Lead Free | |
REACH SVHC标准 | No SVHC | |
REACH SVHC版本 | 2015/06/15 |
SN74AHC125PW 引脚图 | 封装图 | 封装焊盘图
SN74AHC125PW 引脚图
SN74AHC125PW 封装图
SN74AHC125PW 封装焊盘图
产品概述
具有三态输出翻两番总线缓冲器GATES QUADRUPLE BUS BUFFER GATES WITH 3-STATE OUTPUTS
SN74AHC125PW是一款四总线缓冲器, 独立的线路驱动器, 3态输出。当输出启用 (OE)为HIGH, 相应的输出被禁用。当OE为LOW, 相应的数据从A输入传输至Y输出。为确保上电或断电期间高阻抗状态, OE应通过上拉电阻连接至VCC, 电阻的最小值由驱动器的灌电流决定。
.闩锁性能超过250mA, JESD 17
.绿色产品, 无Sb/Br
得捷:IC BUF NON-INVERT 5.5V 14TSSOP
立创商城:SN74AHC125PW
德州仪器(TI):4-ch, 2-V to 5.5-V buffers with 3-state outputs
贸泽:Buffers & Line Drivers Quad Bus Buff Gate With 3-State Outputs
e络盟:缓冲器, 74AHC125, 2 V至5.5 V, TSSOP-14
艾睿:Amplify analog and digital signals by driving the input to the transmission line with this SN74AHC125PW buffer and line driver from Texas Instruments. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 125 °C. This device comes in tube packaging. It has 4 channels per chip. This non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 5.5 V.
安富利:Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin TSSOP Tube
Chip1Stop:Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin TSSOP Tube
Verical:Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin TSSOP Tube
Newark:Buffer, 74AHC125, 2 V to 5.5 V, TSSOP-14
DeviceMart:IC BUS BUFFER TRI-ST QD 14TSSOP