AD822ARMZ点击型号即可查看芯片规格书
AD822ARMZ 中文资料规格参数
| 技术参数 | 供电电流 | 1.4 mA |
电路数 | 2 | |
通道数 | 2 | |
针脚数 | 8 | |
共模抑制比 | 80 dB | |
输入电容 | 2.80 pF | |
带宽 | 1.8 MHz | |
转换速率 | 3.00 V/μs | |
增益频宽积 | 1.9 MHz | |
输入阻抗 | 10.0 TΩ | |
输入补偿电压 | 400 µV | |
输入偏置电流 | 2 pA | |
工作温度(Max) | 85 ℃ | |
工作温度(Min) | -40 ℃ | |
3dB带宽 | 1.9 MHz | |
增益带宽 | 1.9 MHz | |
共模抑制比(Min) | 66 dB | |
电源电压(Max) | 30 V | |
电源电压(Min) | 5 V | |
| 封装参数 | 安装方式 | Surface Mount |
引脚数 | 8 | |
封装 | MSOP-8 | |
| 外形尺寸 | 长度 | 3 mm |
宽度 | 3 mm | |
高度 | 0.85 mm | |
封装 | MSOP-8 | |
| 物理参数 | 工作温度 | -40℃ ~ 85℃ |
| 其他 | 产品生命周期 | Active |
包装方式 | Tube | |
制造应用 | 医用, Wearable Health Monitoring, Spectr, Digital X-Ray, Signal Processing, Power Management, Signal Processing, Medical, Health, Wellness and Fitness, Power Manage, Medical, Clinical Monitoring, Healthcare | |
| 符合标准 | RoHS标准 | RoHS Compliant |
含铅标准 | PB free | |
REACH SVHC标准 | No SVHC | |
军工级 | No | |
REACH SVHC版本 | 2014/06/16 |
AD822ARMZ 引脚图 | 封装图 | 电路图 | 封装焊盘图
AD822ARMZ 引脚图
AD822ARMZ 封装图
AD822ARMZ 电路图
AD822ARMZ 封装焊盘图
产品概述
ANALOG DEVICES AD822ARMZ 运算放大器, 双路, 1.8 MHz, 2个放大器, 3 V/µs, ± 2.5V 至 ± 15V, MSOP, 8 引脚
单电源 JFET运算放大器，Analog Devices
一系列 Analog Devices 的 JFET 输入运算放大器适用于由单轨电源供电操作。这些运算放大器的输入共模范围包括接地（或具有双电源的负电源轨），大多数器件具有轨到轨输出。提供单、双和四路封装选项。
得捷:IC OPAMP GP 2 CIRCUIT 8MSOP
立创商城:AD822ARMZ
欧时:Analog Devices 运算放大器 AD822ARMZ 双, 1.8MHz增益带宽积, 6 → 28 V单电源电压, 8引脚 MSOP封装
贸泽:精密放大器 DUAL, SNGL SPLY PREC"N AMP
艾睿:Op Amp Dual Low Power Amplifier R-R O/P ±15V/30V 8-Pin MSOP Tube
安富利:The AD822 is a dual precision, low power FET input op amp that can operate from a single supply of 5 V to 30 V or dual supplies of ±2.5 V to ±15 V. It has true single-supply capability with an input voltage range extending below the negative rail, allowing the AD822 to accommodate input signals below ground in the single-supply mode. Output voltage swing extends to within 10 mV of each rail, providing the maximum output dynamic range.
Offset voltage of 800 μV maximum, offset voltage drift of 2 μV/°C, input bias currents below 25 pA, and low input voltage noise provide dc precision with source impedances up to a gigaohm. The 1.8 MHz unity-gain bandwidth, -93 dB THD at 10 kHz, and 3 V/μs slew rate are provided with a low supply current of 800 μA per amplifier.
Chip1Stop:OP Amp Dual GP R-R O/P ±15V/30V 8-Pin MSOP Tube
TME:Operational amplifier; 1.9MHz; 3÷36V; Channels:2; MSOP8
Verical:Op Amp Dual Low Power Amplifier R-R O/P ±15V/30V 8-Pin MSOP Tube
Newark:Operational Amplifier, Dual, 2 Amplifier, 1.8 MHz, 3 V/µs, ± 2.5V to ± 15V, MSOP, 8 Pins
