USBUF-2线EMI滤波器和ESD保护，具有上拉电阻，用于USB接口

USBUF点击型号即可查看芯片规格书

芯片规格书搜索工具-icspec

产品概述

描述

The USB specification requires upstream ports to be terminated with pull-up resistors from the D+ and D- lines to Vbus. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements of termination and EMC compatibility, the computing devices are required to be tested for ESD susceptibility.

The USBUF provides the recommended line termination while implementing a low pass filter to limit EMI levels and providing ESD protection which exceeds IEC 61000-4-2 level 4 standard. The device is packaged in a SOT323-6L which is the smallest available lead frame package (50% smaller than the standard SOT23).

所有功能

• Monolithic device with recommended line termination for USB upstream ports
• Integrated Rt series termination and Ct bypassing capacitors.
• Integrated ESD protection
• Small package size
• Benefits
  • EMI / RFI noise suppression
  • Required line termination for USB upstream ports
  • ESD protection exceeding IEC 61000-4-2 level 4
  • High flexibility in the design of high density boards
  • Tailored to meet USB 1.1 standard
• Complies with the following standards IEC 61000-4-2, level 4
  • ± 15 kV (air discharge)
  • ± 8 kV (contact discharge)
  • MIL STD 883E, Method 3015-7
  • Class 3 C = 100 pF; R = 1500 Ω
  • 3 positive strikes and 3 negative strikes (F = 1 Hz)