MSP430F5324IRGCR 中文资料规格参数
| 技术参数 | 频率 | 25 MHz |
针脚数 | 64 | |
时钟频率 | 25.0 MHz | |
RAM大小 | 6 KB | |
位数 | 16 | |
FLASH内存容量 | 64 KB | |
UART数量 | 2 | |
模数转换数(ADC) | 1 | |
FRAM内存容量 | 0 B | |
输入/输出数 | 47 Input | |
工作温度(Max) | 85 ℃ | |
工作温度(Min) | -40 ℃ | |
电源电压(Max) | 3.6 V | |
电源电压(Min) | 1.8 V | |
| 封装参数 | 引脚数 | 64 |
封装 | VQFN-64 | |
| 外形尺寸 | 高度 | 0.95 mm |
封装 | VQFN-64 | |
| 物理参数 | 工作温度 | -40℃ ~ 85℃ (TA) |
| 其他 | 产品生命周期 | Active |
包装方式 | Cut Tape (CT) | |
制造应用 | 便携式器材, 测试与测量, 传感与仪器 | |
| 符合标准 | RoHS标准 | RoHS Compliant |
含铅标准 | Lead Free | |
REACH SVHC标准 | No SVHC | |
REACH SVHC版本 | 2015/06/15 |
MSP430F5324IRGCR 引脚图
MSP430F5324IRGCR 引脚图
产品概述
TEXAS INSTRUMENTS MSP430F5324IRGCR 微控制器, 16位, 混合信号, MSP430F5xx, 25 MHz, 64 KB, 6 KB, 64 引脚, VQFN
TheMSP430F5324IRGCRis a 16-bit ultra-low-power Mixed-signal Microcontroller features a powerful 16-bit RISC MSP430 CPU, 16-bit registers and constant generators that contribute to maximum code efficiency. The architecture combined with five low-power modes, is optimized to achieve extended battery life. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 3.5µs (typical). The device configurations with four 16-bit timer, 12-bit A/D converter, three-channel internal DMA, a 8-channel comparator, two universal serial communication interfaces (USCI), a 32-bit hardware multiplier and 47 general-purpose I/O pins. This device operates at a maximum frequency of 25MHz.
.16-bit RISC architecture, extended memory, up to 25MHz system clock
.Fully integrated LDO with programmable regulated core supply voltage
.Supply voltage supervision, monitoring and brownout
.FLL Control loop for frequency stabilization
.Low-power low-frequency internal clock source (VLO)
.Low-frequency trimmed internal reference source (REFO)
.32kHz Watch crystals (XT1)
.High-frequency crystals up to 32MHz (XT2)
.16-bit Timer TA0, Timer_A with five Capture/Compare registers
.16-bit Timer TA1, Timer_A with three Capture/Compare registers
.16-bit Timer TA2, Timer_A with three Capture/Compare registers
.16-bit Timer TB0, Timer_B with seven Capture/Compare shadow registers
.Enhanced UART supports auto-baudrate detection
.IrDA Encoder and decoder
.Synchronous SPI
.10-bit ADC with internal reference, sample-and-hold and autoscan feature
.Serial on-board programming
.No external programming voltage needed
.Basic timer with RTC
.290µA/MHz Active mode (AM) power consumption
