XC6220B331MR-G点击型号即可查看芯片规格书
XC6220B331MR-G 中文资料规格参数
技术参数 | 输出接口数 | 1 |
输出电压 | 3.3 V | |
输出电流 | 1 A | |
供电电流 | 18µA ~ 108µA | |
针脚数 | 5 | |
耗散功率 | 600 mW | |
跌落电压 | 655 mV | |
输入电压(Max) | 6 V | |
输入电压(Min) | 1.6 V | |
输出电压(Min) | 3.3 V | |
工作温度(Max) | 85 ℃ | |
工作温度(Min) | -40 ℃ | |
耗散功率(Max) | 600 mW | |
输入电压 | ≤6 V | |
封装参数 | 安装方式 | Surface Mount |
引脚数 | 5 | |
封装 | SOT-25 | |
外形尺寸 | 封装 | SOT-25 |
物理参数 | 工作温度 | -40℃ ~ 85℃ |
其他 | 产品生命周期 | Active |
包装方式 | Each | |
制造应用 | 音频, 电源管理, Audio, Power Management, 光纤, Fibre Optics | |
符合标准 | RoHS标准 | RoHS Compliant |
含铅标准 | Lead Free | |
REACH SVHC标准 | No SVHC | |
REACH SVHC版本 | 2016/06/20 |
XC6220B331MR-G 引脚图 | 封装图 | 封装焊盘图
XC6220B331MR-G 引脚图
XC6220B331MR-G 封装图
XC6220B331MR-G 封装焊盘图
产品概述
TOREX XC6220B331MR-G 固定电压稳压器, LDO, 1.6V至6V, 655mV压差, 3.3V输出, 1A输出, SOT-25-5
TheXC6220B331MR-Gis a highly accurate low noise high speed low dropout and large current CMOS Voltage Regulator with GreenOperation function. The XC6220 series consists of a voltage reference, an error amplifier, a current limiter, an inrush current prevention circuit and a phase compensation circuit plus a driver transistor. With a 0.2R on-resistance driver transistor integrated and with output currents up to 1A, the ultra low dropout voltage performance greatly extends battery life as does the GreenOperation function which can switch between high speed and power save modes automatically. Low ESR ceramic capacitors can be used for the output stabilization capacitor (CL). Output voltage is selectable in 0.05V increments within the range of 0.8 to 5.0V, using laser trimming technologies.
.Ceramic capacitor compatible
.Over-current protection circuit and a thermal shutdown circuit are built in
.Over-current protection circuit will operate when the output current reaches its limit current
.Thermal shutdown circuit will operate when the junction temperature reaches its limit temperature
.Inrush protection circuit works by controlling the inrush current
.Any fluctuations to VIN caused by inrush current during system start up can be minimized
.CE function enables the output to be turned off
.IC becomes a stand-by mode resulting in greatly reduced power consumption