L6208-双极步进电机的L6208 DMOS驱动

L6208点击型号即可查看芯片规格书

芯片规格书搜索工具-icspec

产品概述

描述

The L6208 device is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in BCD technology, which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two phase bipolar stepper motor including: a dual DMOS full bridge, the constant off time PWM current controller that performs the chopping regulation and the phase sequence generator, that generates the stepping sequence. Available in PowerDIP24 (20 + 2 + 2), PowerSO36 and SO24 (20 + 2 + 2) packages, the L6208 device features a non-dissipative overcurrent protection on the high-side Power MOSFETs and thermal shutdown.

所有功能

• Operating supply voltage from 8 to 52 V
• 5.6 A output peak current (2.8 A RMS)
• RDS(ON) 0.3 Ω typ. value at Tj= 25 °C
• Operating frequency up to 100 KHz
• Non-dissipative overcurrent protection
• Dual independent constant tOFFPWM current controllers
• Fast/slow decay mode selection

• Fast decay quasi-synchronous rectification
• Decoding logic for stepper motor full and half step drive
• Cross conduction protection
• Thermal shutdown
• Undervoltage lockout
• Integrated fast freewheeling diodes

电路原理图